Student Loan Calculator

Estimate monthly student loan repayments across standard 10-year, extended 20-year, or 25-year repayment schedules.

Plan your higher education debt repayment strategy. Compare the standard 10-year federal repayment timeline against extended repayment plans to see how interest accrual impacts your total lifetime repayment.

How this calculator works

Monthly Payment = [ Principal * (Rate / 12) ] / [ 1 – (1 + Rate / 12)^(-Months) ]. Federal Direct loans use simple daily interest based on 365.25 days.

Key benefits

Assumptions & exclusions

Frequently asked questions

What is the standard repayment plan for federal student loans?

The standard plan is a 10-year (120-month) fixed payment schedule. It results in the fastest debt payoff and lowest total interest compared to extended or graduated plans.

How much more interest does a 20-year term cost compared with 10 years?

Substantially more than double the payment relief would suggest. Stretching the term cuts the monthly payment by roughly a third on typical balances, because the payment is mostly interest early either way — but the balance then declines so slowly that total interest can more than double. Run both terms here and compare the total-interest figures directly; the difference is the true price of the lower payment.

Does this calculator include income-driven repayment or loan forgiveness?

No. It models the standard amortization path only — a fixed payment that retires the loan over the chosen term. Income-driven plans tie payments to earnings and can end in forgiveness of a remaining balance, and public-service programs have their own rules. Those outcomes depend on program details that change over time, so use the CFPB's student loan resources and your servicer for current information.

What happens to interest while I am in school or in a grace period?

On most loans, interest keeps accruing even when no payment is due. If that accrued interest is unpaid when repayment begins, it may be added to the principal — capitalization — after which you pay interest on a larger balance for the entire term. When using this calculator, enter the balance including any capitalized interest so the payment and totals reflect what you truly owe.

Can I combine several student loans into one calculator entry?

You can approximate it by adding the balances and using a balance-weighted average of the rates — weight each loan's rate by its share of the total balance. The approximation is reasonable when the rates are close together. When one loan's rate is far above the others, modeling that loan separately gives a more useful picture, especially if you are considering extra payments.

Why is my servicer's payment slightly different from the calculator's?

Small differences are normal. Servicers compute interest daily, use exact disbursement and repayment start dates, and may include origination fees or capitalized interest in the balance. A few dollars of difference reflects those mechanics. A large difference usually means the balance or rate entered here does not match the servicer's — check those two figures first.

Formula-Based Calculator · By QalcTools Editorial Team. Formulas tested against independent reference values · Content reviewed November 2026 by the QalcTools Editorial Team.

Methodology note: U.S. Department of Education Federal Student Aid discrete formulas.

Related calculators

Category: Loans & Credit Calculators

About this calculator

Student loan choices are usually framed as a monthly payment — but the term you pick quietly decides how much of your education you pay for twice in interest. This calculator prices a student loan as a standard amortizing loan: enter the amount owed, the interest rate, and a repayment term, and it returns the fixed monthly payment, the total interest over the life of the loan, and the full cost. The term selector includes the 10-year schedule used by the standard federal repayment plan and longer extended options, so you can compare them on identical numbers. It is the right first step before choosing a plan, refinancing, or deciding how much extra you can send each month.

How it works

The calculator treats the loan like any fixed installment loan. From the principal, rate, and term it derives the single monthly payment that would retire the balance exactly at the end of the term, then walks the balance down month by month: each payment first covers that month's interest on the remaining balance, and the rest reduces principal. Early payments are mostly interest; later ones are mostly principal. The totals accumulate from that walk — total interest is the sum of every month's interest charge, and total cost is principal plus interest. Switch the term and the payment is re-derived from scratch, which is why stretching the term lowers the payment far less than it raises the total interest.

The formula, explained

M = P × r(1 + r)^n ÷ ((1 + r)^n − 1), with r = APR ÷ 100 ÷ 12 and n = term in months

The engine computes the payment with the standard amortization formula (or principal ÷ n when the rate is zero), rounds the payment to cents, then simulates the schedule month by month until the balance falls to one cent or less. The term is capped at 1,200 months and the rate at 100 percent. In this configuration no origination fee is applied, so the effective APR it reports equals the note rate you entered. Total interest comes from the simulation rather than from payment × n, so the final partial payment is accounted for exactly.

Inputs and variables

VariableMeaningExample
Loan Principal BorrowedThe amount owed at the start of repayment. If interest accrued while you were in school and was added to the balance, it belongs in this figure.$32,000
Interest Rate (Annual APR %)The fixed rate on the loan. For several loans at different rates, a balance-weighted average is the closest single approximation.5.5%
Loan Term (Months)The repayment length. The selector runs to 84 months generally, with 120 months (the standard federal schedule) and 240 months (extended) offered for student loans.120 months
Desired Target Payoff WindowA goal slider for finishing early. The tool works out the higher monthly payment needed to clear the loan inside that window, and how much interest and time that would save versus the standard schedule.24 months

Worked example

A graduate owes $32,000 at a fixed 5.5 percent rate and chooses the standard 10-year (120-month) repayment schedule.

  1. The monthly rate is r = 5.5% ÷ 12 ≈ 0.45833%, and the payment is M = 32,000 × r(1 + r)^120 ÷ ((1 + r)^120 − 1) = $347.28.
  2. In month 1, interest is $32,000 × 0.0045833 = $146.67, so $200.61 of the payment reduces principal, leaving $31,799.39.
  3. The interest share shrinks every month as the balance falls; by the final year, most of each $347.28 is principal.
  4. Across all 120 payments the borrower pays $347.28 × 120 ≈ $41,674 in total.
  5. Final result from the engine: payment $347.28 per month, total interest $9,674, total cost of the loan $41,674.

Monthly payment $347.28 for 120 months; total interest $9,674; total repaid $41,674 on $32,000 borrowed.

Interest adds about 30 percent on top of the amount borrowed even on the standard schedule — and the payment only stays this manageable because the term is relatively short. Doubling the term would cut the payment by roughly a third, not a half, while more than doubling the interest, because the balance declines so slowly in the early years. That trade-off, not the monthly figure alone, is what a term decision is really about.

Understanding your results

The three numbers form a set: the payment tells you whether the plan fits a monthly budget, total interest tells you what the education debt actually costs beyond the sticker price, and total cost is the figure to compare across terms. When you test a longer term, judge it by how much interest it adds per dollar of monthly relief — on student-loan-sized balances and rates, extended terms routinely buy a modest payment cut with a five-figure interest increase.

The amortization pattern explains the payoff experience: because early payments are interest-heavy, the balance seems barely to move for the first couple of years even when you pay exactly on schedule. That is normal arithmetic, not a servicer error. It also means extra principal sent early is unusually powerful, since it removes balance that would otherwise be charged interest for the entire remaining term — the companion payoff tool exists to price that effect.

Assumptions and limitations

This is a standard fixed-rate amortization model, and a large part of real student lending lives outside it. Income-driven repayment plans, forgiveness programs, deferment, forbearance, and graduated schedules are not modeled, and eligibility rules for federal programs change over time — the CFPB's student loan resources describe the current landscape. The model assumes repayment starts immediately on the full principal: interest that accrues during school or a grace period, and any capitalization of that interest, must already be inside the principal figure you enter. Multiple loans at different rates are compressed into one loan at one rate, which is an approximation. Federal loan interest is actually computed daily, so a servicer's figures can differ by small amounts.

Common mistakes to avoid

Sources