General Loan Calculator

Universal loan calculation tool supporting monthly, bi-weekly, or weekly payment frequencies and extra payments.

A versatile, multi-frequency lending calculator for any consumer or commercial loan. Switch between monthly, bi-weekly, or weekly payments, test extra principal contributions, and inspect full amortization tables.

How this calculator works

Periodic Payment = P [ r(1 + r)^n ] / [ (1 + r)^n – 1 ], where r = Annual Rate / Periods per Year, and n = Years * Periods per Year (12, 26, or 52). Handles 0% interest loans via linear division P / n.

Key benefits

Assumptions & exclusions

Frequently asked questions

How does bi-weekly payment save interest on a loan?

Paying bi-weekly results in 26 half-payments per year, which equals 13 full monthly payments instead of 12. This extra payment applied directly to principal shaves months or years off the loan term.

How is my loan payment calculated?

The payment comes from the standard amortization formula: the loan amount is spread over the total number of payments at the per-period rate, so each payment covers that period’s interest plus a growing slice of principal. At a 0% rate, the payment is simply the amount divided by the number of payments.

What does total cost of loan include?

In this calculator it is the principal plus all interest paid over the life of the loan. On this page no origination fee is modeled, so if your lender charges upfront fees, your true total cost will be higher than the figure shown.

How much can extra payments save?

It depends on the rate, balance and how early you start, because extra payments cut the balance that future interest is charged on. In the worked example on this page, $100 extra a month on a $20,000 loan at 10.5% finishes 9 payments early and saves $920 of interest.

Is a longer term ever the right choice?

A longer term lowers the payment, which can be the right trade when cash flow is tight or the alternative is more expensive debt. The cost is more total interest, so compare the total interest line at two terms before choosing the longer one.

Why is most of my early payment interest?

Interest each period is charged on the balance you still owe, which is largest at the start. As the balance falls, the interest share shrinks and more of the same payment reaches principal — the pattern the amortization table on this page lays out year by year.

Formula-Based Calculator · By QalcTools Editorial Team. Formulas tested against independent reference values · Content reviewed November 2026 by the QalcTools Editorial Team.

Methodology note: Standard discrete compounding formulas, applied period by period to the balance you enter.

Related calculators

Category: Loans & Credit Calculators

About this calculator

Most borrowing decisions are really three decisions at once: how much, at what rate, and repaid how fast. This general loan calculator puts those levers on one page for any installment loan — personal, auto, home improvement or otherwise. You set the amount, the annual rate and the term in months, choose a monthly, biweekly or weekly payment schedule, and optionally add an extra amount to every payment. The tool returns the payment per period, total interest, the full cost of the loan, and a year-by-year amortization summary — plus, when you add extra payments, exactly how many periods sooner you finish and how much interest that saves.

How it works

The engine converts your term in months into a count of payment periods based on the schedule you choose — 12 periods a year for monthly, 26 for biweekly, 52 for weekly — and converts the annual rate into a matching per-period rate. The standard payment comes from the amortization formula at that period rate. It then simulates the loan period by period: interest is charged on the current balance, the scheduled principal portion is applied, and any extra payment you set is added entirely to principal, until the balance reaches zero. A baseline run without the extra payment is kept for comparison, so the periods and interest saved by prepaying are measured rather than guessed.

The formula, explained

Payment per period = P × q(1 + q)^k ÷ ((1 + q)^k − 1); each period: Interest = Balance × q; Principal = Payment − Interest (+ extra)

The engine floors the principal at zero, caps the term at 1,200 months and the rate at 100 percent, then derives the period count from the frequency: months divided by 12, times 12, 26 or 52 periods per year. The periodic payment uses the annuity formula, or principal divided by periods when the rate is 0. In the simulation, each period’s interest is the balance times the period rate, the scheduled principal is the payment minus that interest (never more than the balance), and the extra payment is applied to principal after it, capped at what remains. Results report the payment to cents, interest and totals rounded to whole dollars, and a yearly summary schedule grouped by period count.

Inputs and variables

VariableMeaningExample
Loan Amount (Principal)The amount borrowed before interest. It is the base on which every interest charge in the schedule is calculated.$20,000
Annual Interest RateThe yearly rate on the loan, converted inside the tool into a per-period rate matching your payment schedule.10.5%
Term (Months)The contractual length of the loan in months, converted into 48 monthly, 104 biweekly or 208 weekly periods for a four-year term.48 months
Payment FrequencyHow often payments are made: monthly (12 per year), biweekly (26) or weekly (52). More frequent payments retire principal slightly sooner.Monthly
Extra Payment Per PeriodAn optional amount added to every payment and applied entirely to principal. It shortens the loan without changing the scheduled payment itself.$100 per month

Worked example

A borrower takes a $20,000 loan at 10.5 percent over 48 months with monthly payments, and adds $100 of extra principal to every payment.

  1. Scheduled payment: monthly rate 10.5% ÷ 12 = 0.875%. The formula over 48 periods gives $512.07 per month.
  2. Without any extra payment, the loan runs all 48 periods and accrues $4,579 of interest, for a total cost of $24,579.
  3. With $100 extra each month, each payment directs $612.07 at the balance, and the simulation clears the loan in 39 periods — 9 periods early.
  4. Interest with the extra payments: $3,660, a saving of $920 against the baseline.
  5. Total cost with prepayment: $20,000 principal + $3,660 interest = $23,660.

A scheduled payment of $512.07 per month; with $100 extra monthly, payoff in 39 periods instead of 48, total interest of $3,660 and a total loan cost of $23,660 — saving $920 of interest.

The example shows prepayment as a trade with a stated price on both sides: $100 a month of extra cash flow buys back nine months of payments and $920 of interest. On shorter, mid-rate loans the saving is meaningful but not dramatic — the dramatic lever here is the rate itself, since the same loan at 6 percent would cost roughly half the baseline interest. Use the tool to compare those levers honestly: rate shopping first, term second, extra payments third.

Understanding your results

Read the payment and the total interest as a pair. The payment tells you whether the loan fits your month; total interest tells you what the loan actually costs, and total cost of loan — principal plus interest plus any fees in the model — is the figure to compare across offers with different terms. A longer term almost always lowers the payment while raising the cost, and this page makes that swap visible in one glance.

The amortization summary explains where the money goes: early periods are interest-heavy because the balance is at its largest, and principal dominates late. That is why extra payments do their best work early, and why the periods-saved figure grows quickly at first. If you use biweekly or weekly schedules, expect a modest additional benefit — the period rate is smaller and principal is chipped more often, but frequency alone never rescues an expensive rate.

Assumptions and limitations

This is a fixed-rate, level-payment model: it assumes the rate never changes, payments arrive on schedule, and no late fees, deferments or prepayment penalties apply. On this page no origination fee is modeled, so the effective rate shown equals the rate you enter; loans with upfront fees cost more than this page shows, which the APR calculator on this site is designed to expose. Variable-rate loans, balloon structures and daily-interest products behave differently from the periodic model used here. Treat the output as an exact calculation of the scenario you entered, then confirm fees, rate type and prepayment terms in the lender’s actual agreement.

Common mistakes to avoid

Sources

Related guides