Stock Return Calculator

Calculate Total Shareholder Return (TSR) combining price appreciation, dividends, and annualized CAGR holding returns.

Measure your total return from owning a stock. Combines capital gains with total dividend income and holding duration to calculate both cumulative return and annualized compound annual growth rate (CAGR).

How this calculator works

Total Return % = [(Ending Value + Dividends - Beginning Value) / Beginning Value] * 100. Annualized Return = [(Ending Value + Dividends) / Beginning Value]^(365 / Days) - 1.

Key benefits

Assumptions & exclusions

Frequently asked questions

Why is annualized return more important than total percentage gain?

A 50% total gain earned in 1 year is extraordinary (50% annualized). That same 50% gain earned over 10 years represents only a 4.14% annualized return, which may barely outpace inflation.

What is the difference between total return and price return?

Price return measures only the change in the share price. Total return adds the dividends received during the holding period, which is the return the investor actually experienced. For dividend-paying stocks held for years, the gap between the two figures can be several percentage points and grows with every payout collected.

How is annualized return calculated from total return?

The total gain is converted into a growth multiple on the amount invested, then raised to the power of 365 divided by the holding days, and one is subtracted. A 40 percent gain over two years becomes about 18.3 percent per year, because the same total spread over more time represents a slower yearly pace.

Can annualized return be misleading for short holding periods?

Yes. Annualizing magnifies short results: a 5 percent gain in a single month converts to a headline rate near 80 percent a year, which says nothing about whether such a pace could continue. Use annualized figures to compare completed periods of a year or more, and treat short-period annualizations as arithmetic rather than expectations.

Do I include reinvested dividends in total return?

Count the value they created either way, but avoid counting twice. If dividends were taken as cash, add the cash total as this page does. If they were reinvested, the extra shares they bought are already reflected in your ending position value, so adding the same dividends again on top would double-count them.

Why is my return lower than the stock's percentage price gain?

Usually because of costs and measurement. This page measures return on your full cost basis, including the buy commission, and nets the sell commission out of proceeds, so the percentage lands slightly below the raw price change. If the stock paid no dividend to offset those frictions, the gap is purely the cost of trading.

Formula-Based Calculator · By QalcTools Editorial Team. Formulas tested against independent reference values · Content reviewed November 2026 by the QalcTools Editorial Team.

Methodology note: GIPS (Global Investment Performance Standards) compliant time-weighted total return methodology.

Related calculators

Category: Investments & Retirement Calculators

About this calculator

A price chart tells only part of what a stock paid you. Dividends collected along the way are real return too, and the time a gain took to arrive decides whether it was actually impressive. This calculator combines all three elements — the price change, the dividends received and the holding period — into the total return on a trade and an annualized version of that return. It suits the investor reviewing a closed position or marking an open one who wants the complete scorecard: dollars earned, percentage earned, and the yearly pace that percentage represents once time is taken into account.

How it works

The mechanics start from the same trade accounting as a basic stock calculation: cost basis from the buy price, shares and buy commission; proceeds from the sale or current price, less the sell commission, plus total dividends received. The return percentage is the profit divided by that full basis, which is why dividends visibly lift it above the raw price change. The engine then annualizes: it converts the total gain into a growth multiple on the basis and raises it to 365 divided by the holding days, so a gain earned quickly annualizes higher than the same gain earned slowly. On this page the holding period passed to the engine is fixed at 365 days, so the two figures coincide — a behavior described plainly in the limitations.

The formula, explained

Total return % = (Proceeds + Dividends − Basis) ÷ Basis × 100; Annualized return % = ((Proceeds + Dividends) ÷ Basis)^(365 ÷ Holding days) − 1, all × 100

The engine floors all money inputs at zero, defaults missing commissions and dividends to zero, and defaults the holding period to 365 days when none is supplied — and the page as built passes 365, its fixed state value, with no on-page field to change it. Total return is net profit divided by cost basis as a percentage, rounded to two decimals. Annualized return takes the ratio of final value (basis plus profit) to basis, raises it to 365 over holding days, subtracts one and expresses it as a percentage, also to two decimals. Dividends enter proceeds before both calculations, so they raise the total and the annualized figure alike.

Inputs and variables

VariableMeaningExample
Buy Price per ShareThe price paid when the position was opened. Together with shares and the buy commission it sets the basis every return is measured against.$80.00
Sell / Current Market PriceThe closing price for a finished trade, or today’s price to mark an open one. The return is only final when this price is final.$110.00
Number of SharesPosition size. It scales the dollar profit but cancels out of the percentage return, which is driven by prices, dividends and fees per share.150 shares
Total Dividends ReceivedAll cash dividends collected while holding. This is the input that separates a total-return figure from a price-only figure.$300
Total Broker CommissionRound-trip trading fees, entered as one total on the page and split evenly between the buy and sell sides before the engine runs.$0 in the worked example
Trade Status (Realized / Unrealized)Closed sale or open position. The arithmetic is identical; the label records whether the return is locked in or still exposed to price moves.Realized (closed sale)

Worked example

An investor buys 150 shares at $80 with no commissions, collects $300 of dividends while holding, and sells at $110 after a 365-day holding period, closing the trade.

  1. Cost basis: 150 × $80 = $12,000. Gross proceeds: 150 × $110 = $16,500. Net proceeds with dividends: $16,500 + $300 = $16,800.
  2. Net profit: $16,800 − $12,000 = $4,800. Price appreciation alone accounts for $4,500 of it; dividends add the remaining $300.
  3. Total return: $4,800 ÷ $12,000 = 40.00%. Without the dividends it would have been 37.50% — the payout contributed 2.50 points.
  4. Annualized return over the 365-day period the page passes: (1.40)^(365 ÷ 365) − 1 = 40.00%, identical to the total because the holding period is exactly one year.
  5. Break-even sale price for reference: ($12,000 − $300) ÷ 150 = $78.00, pulled below the buy price by the dividends already banked.

A net profit of $4,800 on a $12,000 basis — a total return of 40.00%, an annualized return of 40.00% over the one-year period, and a break-even price of $78.00.

Two lessons live in this example. First, the dividend was not a footnote: $300 on a $12,000 position added two and a half percentage points, the difference between reporting what the price did and what the investor actually earned. Second, total and annualized returns agree only because the holding period is exactly a year; the same 40 percent spread over five years would annualize to roughly 7 percent, a far less exciting pace. Time is the denominator every return quietly carries.

Understanding your results

Compare investments on the total-return line, never on price change alone. Two stocks can post identical price gains while one paid steady dividends and the other paid nothing; their owners did not have the same experience, and only the total figure shows it. The break-even price reinforces the point from the other side — dividends already received mean the stock can fall below your purchase price and the trade can still come out ahead.

Annualized return is the fair comparison across different holding periods, but handle short periods with suspicion: annualizing magnifies whatever happened, so a strong month becomes a spectacular “annual” rate that nobody should expect to repeat. Use it to compare a one-year trade with a three-year trade on equal footing, and distrust it most exactly when the holding period is shortest and the number looks best.

Assumptions and limitations

One behavior of this page should be stated plainly: the holding period sent to the engine is a fixed 365 days — there is no field on the form to change it — so on this page the annualized return always equals the total return, whatever your real holding period was. For a multi-year position, compute the annual pace separately from the total return shown. The calculation also takes dividends as one lump sum with no timing or reinvestment, uses the single buy and sale prices entered, and is shown before any tax on gains or dividends. Brokerage records remain the source of truth for a real account.

Common mistakes to avoid

Sources

Related guides