Required Minimum Distribution Calculator
Calculate mandatory IRS RMD withdrawals under SECURE Act 2.0 (Age 73/75 rules), IRS Uniform Lifetime Table, and excise penalty.
Compute your annual mandatory retirement account withdrawals under the SECURE Act 2.0. Determines your starting age (age 73 for those born 1951-1959; age 75 for those born 1960 or later), references the IRS Uniform Lifetime Table (Table III), calculates required distributions, estimated taxes, and models the 25% missed RMD excise tax penalty.
How this calculator works
RMD = Prior Year December 31 Account Balance / IRS Distribution Period (Uniform Lifetime Table III). Missed RMD Penalty = RMD * 0.25 (reduced from 50% under SECURE 2.0).
Key benefits
- Automated SECURE Act 2.0 starting age detection (Age 73 vs Age 75)
- Official IRS Uniform Lifetime Table divisor integration (ages 72 to 100+)
- Calculates estimated federal income tax due on the mandatory distribution
- Highlights the 25% IRS excise penalty for failing to take an RMD on time
Assumptions & exclusions
- Assumes account owner uses Uniform Lifetime Table III (spouse is not more than 10 years younger and sole beneficiary).
Frequently asked questions
When do I have to start taking RMDs under SECURE Act 2.0?
If you were born between 1951 and 1959, your RMD starting age is 73. If you were born in 1960 or later, your RMD starting age increases to 75. You must take your first distribution by April 1 of the year following the year you reach that age.
Which retirement accounts are subject to RMDs?
Traditional IRAs, SEP IRAs, SIMPLE IRAs, 401(k)s, 403(b)s, and 457(b) plans are subject to RMDs. Under SECURE Act 2.0, designated Roth 401(k) accounts are now exempt from pre-death RMDs, joining Roth IRAs.
What is the penalty for missing an RMD deadline?
SECURE Act 2.0 reduced the missed RMD excise tax penalty from 50% down to 25% of the undistributed amount. The penalty can be further reduced to 10% if corrected in a timely manner within the two-year correction window.
Which balance should I enter if my account has grown or fallen this year?
Enter the balance from the end of the previous year, December 31, regardless of what the account is worth today. This year’s market moves affect next year’s calculation, not this one, which is why a required amount can feel large after a market fall.
What if my spouse is much younger and is my only beneficiary?
A different table applies when your spouse is your sole beneficiary and more than ten years younger: its larger divisors produce a smaller required distribution. This page uses the standard uniform table, so in that situation it would overstate your required amount; confirm your figure against the joint-life table.
Can I take the money from just one of my retirement accounts?
For your own IRAs, the required amounts are calculated account by account but can generally be withdrawn from one or any combination of them. Workplace plans are stricter: each plan’s required distribution must come out of that plan itself, so one withdrawal does not settle a 401(k) obligation.
Formula-Based Calculator · By QalcTools Editorial Team. Formulas tested against independent reference values · Content reviewed November 2026 by the QalcTools Editorial Team.
Methodology note: IRS Publication 590-B (Distributions from IRAs) and SECURE 2.0 Act of 2022 statutory tables.
Related calculators
Category: Investments & Retirement Calculators
About this calculator
Required minimum distributions are the tax law’s way of ending the deferral: once you reach the starting age for your birth year, a minimum amount must leave your traditional retirement accounts each year, whether you need the money or not, and it is taxed as income. This calculator works out that amount for the current year from the balance your accounts held at the end of the prior year, your age and your birth year. It also shows the estimated tax the distribution creates, the balance left afterward, and the excise penalty that would apply if the required amount were not taken.
How it works
Enter your birth year, current age, the combined prior December 31 balance of your traditional accounts, and your expected marginal tax rate. The birth year sets your starting age under current law — 73 if you were born from 1951 through 1959, and 75 if you were born in 1960 or later — and the page first reports whether a distribution is required from you this year at all. If it is, your balance is divided by a life-expectancy divisor for your age to produce the required amount. The estimated tax applies your rate to that amount, and the penalty line prices a complete miss at 25 percent of what should have come out.
The formula, explained
RMD = Prior December 31 balance ÷ Life-expectancy divisor for your age (due only once your age reaches your starting age); Estimated tax = RMD × Marginal tax rate; Missed-RMD penalty = RMD × 25%
- Starting age — Age 73 for birth years 1951–1959 and age 75 for birth years 1960 or later, as applied by the engine (years)
- Divisor — The life-expectancy factor for your current age taken from the divisor table built into the engine (years)
- Prior Dec 31 balance — What your traditional accounts were worth at the end of the previous year — the balance the law measures ($)
- Marginal tax rate — The tax rate you expect the distribution to be taxed at, used for the estimated tax line only (%)
The engine sets the starting age to 75 when the birth year is 1960 or later and to 73 otherwise, and treats a distribution as required when your current age reaches that starting age; below it, the required amount is zero. Divisors come from a table built into the code that lists selected ages — every age from 72 through 90, plus 95 and 100 (for example 24.6 at age 75, 20.2 at 80 and 12.2 at 90). For an age above 90 that is not listed, the engine estimates the divisor as 12.2 minus 0.6 for each year past 90, floored at 2.0, and for ages under 73 it uses 27.4 as a placeholder while no distribution is due. The required amount is balance divided by divisor, tax is that amount times your rate (22 percent if none is entered), the remaining balance subtracts the distribution, and the penalty is 25 percent of the required amount. Figures are rounded to cents.
Inputs and variables
| Variable | Meaning | Example |
|---|---|---|
| Account Owner Birth Year | The year you were born, which fixes your starting age: 73 for 1951 through 1959, and 75 for 1960 or later. One year of birth-year difference can delay required distributions by two years. | 1951 |
| Current Age | Your age this year. It decides both whether you have reached your starting age and which divisor applies to your balance. | 75 years |
| Prior Year December 31 Balance | The value of your traditional IRA and similar accounts on the last day of the previous year — not today’s balance. Market moves since then do not change this year’s required amount. | $600,000 |
| Expected Marginal Tax Rate (%) | The rate applied to estimate the tax on the distribution. The distribution stacks on top of your other income, so use the bracket it will actually fall into. | 22% |
Worked example
A retiree born in 1951 is 75 this year, held $600,000 across traditional accounts on the prior December 31, and expects a 22 percent marginal tax rate.
- Birth year / current age: 1951 / 75
- Prior December 31 balance: $600,000
- Marginal tax rate: 22%
- Born in 1951, the starting age is 73, so at 75 a distribution is required this year.
- The engine’s divisor for age 75 is 24.6.
- Required distribution: $600,000 ÷ 24.6 = $24,390.24 — about 4.07% of the measured balance.
- Estimated tax at 22%: $24,390.24 × 22% = $5,365.85. Balance after the distribution: $600,000 − $24,390.24 = $575,609.76.
- Penalty if the distribution were missed entirely: $24,390.24 × 25% = $6,097.56, on top of still owing the distribution and its tax.
A required distribution of $24,390.24 for the year, with an estimated $5,365.85 of tax, $575,609.76 remaining, and a $6,097.56 penalty exposure if the amount were not taken.
Two features of the result deserve attention. First, the required amount is measured from last year’s closing balance, so a market fall this year does not shrink the obligation — the $24,390 is due even if the account is worth less today. Second, the penalty for ignoring it, at 25 percent, dwarfs the tax itself, which is why the distribution is usually taken well before the deadline and often withheld for taxes at the source. For many retirees the practical question is not whether to take the distribution but what to do with money they did not need: it can be reinvested in a taxable account, though it cannot go back into an IRA as a rollover.
Understanding your results
Watch the divisor shrink as you age, because that is what makes required distributions grow as a share of the account: dividing by 24.6 at 75 takes about 4.1 percent of the balance, while the divisor of 12.2 at age 90 takes about 8.2 percent. Even if your balance stays flat, the required withdrawal roughly doubles its percentage across that span, which is why late-retirement tax planning — and the rising income it forces — deserves attention well before the starting age arrives.
The estimated tax line is deliberately simple: one rate applied to one distribution. Your real tax on the distribution depends on how it stacks with Social Security, pensions, capital gains and deductions, and on state tax, which is not included. Use the estimate for cash planning — many retirees have tax withheld from the distribution itself so there is no surprise bill — and use the remaining balance line to see the account level next year’s calculation will start from, before growth and the next divisor are applied.
Assumptions and limitations
This page works from one combined balance and one divisor table, while the real rules have important branches it does not follow. If your spouse is your sole beneficiary and more than ten years younger, a different table with larger divisors and smaller distributions applies. The divisor table built into the engine lists selected ages and estimates the rest with a fallback formula, so for an unlisted age past 90 its divisor can differ slightly from the official table — confirm your exact divisor against the current IRS table before acting. Workplace plans can have their own timing rules, including a still-working exception for some participants, inherited accounts follow separate schedules entirely, and Roth IRAs have no lifetime distributions for the owner.
Common mistakes to avoid
- Using today’s balance instead of the prior December 31 balance. The law measures the account on the last day of the previous year. Entering a current balance after a market move produces a required amount that is too high or too low.
- Assuming one withdrawal automatically satisfies every account. IRA distributions can generally be aggregated across your own IRAs, but workplace plan distributions must come from each plan separately. One check rarely settles every account type.
- Waiting until December to act. Custodians get crowded at year-end and a missed deadline carries a 25% excise tax on the shortfall. Taking the distribution earlier in the year leaves room to correct any error.
- Spending the gross amount without reserving for tax. The whole distribution is ordinary income. In the example, $5,366 of the $24,390 is effectively the tax share — plan withholding or set it aside before spending the rest.
- Believing required means required to spend. Only the withdrawal is required, not the spending. Money you do not need can be reinvested in a regular taxable account, where it keeps working without the distribution clock.