Refinance Break-Even Calculator
Calculate the exact number of months needed for monthly mortgage savings to pay back your refinancing closing costs.
Never refinance without knowing your break-even point. This tool divides your total upfront closing costs (appraisal, title, origination, underwriting) by your monthly payment reduction to verify if you will stay in the home long enough to profit.
How this calculator works
Break-Even Months = Total Closing Costs / (Old Monthly Payment - New Monthly Payment).
Key benefits
- Clear Go / No-Go decision framework
- Visual timeline showing payback horizon
- Calculates net profit after 3, 5, and 10 years of ownership
Assumptions & exclusions
- Assumes closing costs paid out-of-pocket or factored into net break-even calculation
- Excludes future property appreciation and inflation discount factors
Frequently asked questions
What is a good refinance break-even period?
A break-even period under 24 to 36 months is considered excellent. If you plan to sell or move within 2 years, refinancing rarely makes sense.
How is the break-even point calculated?
Divide the total closing costs of the new loan by the monthly payment savings. If costs are $5,200 and the new loan saves $583 a month, break-even is about 9 months — the point where accumulated savings have repaid the upfront costs.
What closing costs should I include?
Include lender and third-party charges such as origination, appraisal, title and underwriting fees from the Loan Estimate. Prepaid items you would owe anyway, like escrow deposits for taxes and insurance, are usually left out of the break-even math.
Does rolling closing costs into the loan change break-even?
Yes. Financed costs raise the new balance, which raises the new payment and shrinks the monthly savings, so break-even arrives later — and you pay interest on the costs for the life of the loan. Toggle the option in the calculator to compare both ways.
Can a refinance break even quickly but still be a bad deal?
Yes. If the new term stretches years beyond your old payoff date, monthly savings can look strong while lifetime interest savings stay small or turn negative. Check the lifetime figure next to the break-even month before deciding.
What if I plan to move before break-even?
Then the refinance does not pay off on payment savings alone: you would sell before the savings recover the closing costs. In that case keeping the current loan, or negotiating lender credits toward costs, usually leaves you ahead.
Formula-Based Calculator · By QalcTools Editorial Team. Formulas tested against independent reference values · Content reviewed November 2026 by the QalcTools Editorial Team.
Methodology note: Standard simple payback period financial formulation.
Related calculators
Category: Mortgage & Housing Calculators
About this calculator
Every refinance charges a toll before it starts saving you money: appraisal, title, origination and other closing costs paid upfront. The break-even point is the month when the accumulated monthly savings finally repay that toll — before it, the refinance has cost you money; after it, the savings are real. This calculator is built around that single decision figure. You describe the loan you have and the loan you are offered, and it returns the monthly savings, the break-even month, and the lifetime interest difference, so you can test the offer against how long you honestly expect to keep the home and the loan.
How it works
You enter your remaining balance, current rate, current principal-and-interest payment and years left, then the offered rate, the new term and the closing costs, choosing whether those costs are paid in cash or rolled into the new balance. The tool projects the interest still owed on your current loan by amortizing it with the payment you entered, computes the new loan’s payment with the standard formula, and subtracts to find the monthly saving. Dividing closing costs by that saving and rounding up gives the break-even month. It also compares lifetime cost on both paths — remaining interest if you stay, versus all payments on the new loan plus any costs paid in cash.
The formula, explained
Break-even months = Closing costs ÷ Monthly savings (rounded up); Monthly savings = Current P&I − New P&I; New P&I = L × j(1 + j)^m ÷ ((1 + j)^m − 1)
- Closing costs — Upfront fees for the new loan: appraisal, title, origination and similar charges ($)
- Current P&I — Your existing monthly principal and interest payment ($/month)
- New P&I — Principal and interest payment on the replacement loan ($/month)
- L — New loan amount: remaining balance, plus closing costs if they are rolled in ($)
- j — New monthly rate: new annual rate % ÷ 100 ÷ 12 (decimal/month)
The engine amortizes your current balance at your current rate using the payment you entered, month by month, to total the remaining interest. For the new loan it adds closing costs to the balance only when the roll-in option is selected; otherwise the balance is unchanged and the costs are counted as an upfront outlay against the savings. The new payment uses the annuity formula with the rate capped at 100 percent and the term capped at 1,200 months. Break-even is the ceiling of closing costs divided by monthly savings, and it reports 0 when the new payment is not lower than the current one. Lifetime net savings compare the old path’s remaining interest plus balance with the new path’s total payments plus upfront costs.
Inputs and variables
| Variable | Meaning | Example |
|---|---|---|
| Current Remaining Mortgage Balance | What you still owe today. The replacement loan must cover at least this amount, so it anchors both sides of the comparison. | $320,000 |
| Current Interest Rate | The rate on your existing loan, used to project the interest you would still pay if you changed nothing. | 7.75% |
| Current Monthly P&I | The principal-and-interest portion of your current payment only — not the tax and insurance escrow. Your statement or loan documents show this figure. | $2,450 per month |
| Years Remaining | How long your current loan still has to run. It defines the honest baseline of interest you would pay from now to payoff. | 26 years |
| Refinance Closing Costs | The lender and third-party fees for the new loan. They are the numerator of the break-even division — the amount the savings must first repay. | $5,200 |
| New Interest Rate | The rate offered on the replacement loan. Enter the actual note rate of the offer, not a headline rate that assumes points you are not buying. | 5.75% |
| New Loan Term | The length of the new loan. A fresh 30-year term maximizes monthly savings but restarts the interest clock, which the lifetime figure exposes. | 30 years |
| Roll Closing Costs Into Loan | Whether the costs are financed in the new balance instead of paid in cash. Financing them raises the amount borrowed and the interest charged on the costs themselves. | Off (paid in cash) |
Worked example
A borrower owes $320,000 at 7.75 percent with 26 years remaining and a principal-and-interest payment of $2,450. An offer prices a new 30-year loan at 5.75 percent with $5,200 of closing costs paid in cash.
- Current balance: $320,000
- Current rate / payment: 7.75% / $2,450 per month
- Years remaining: 26
- New rate / term: 5.75% / 30 years
- Closing costs: $5,200, paid in cash
- New loan amount: $320,000, since the costs are paid in cash rather than rolled in.
- New payment: at a monthly rate of 5.75% ÷ 12 over 360 months, the formula gives $1,867 per month.
- Monthly savings: $2,450 − $1,867 = $583 per month.
- Break-even: $5,200 ÷ $583 ≈ 8.9 months, rounded up to 9 months — the refinance moves ahead for any borrower who keeps the loan past that point.
- Lifetime check: staying put leaves $385,951 of remaining interest; the new loan carries $352,276 of interest. Net lifetime savings after the $5,200 of costs: $28,475.
Monthly savings of $583, a break-even point of 9 months, and lifetime net savings of $28,475 after closing costs, on a new payment of $1,867.
This is what a strong refinance profile looks like: the break-even arrives in under a year, so even a borrower unsure about staying five years clears it comfortably, and the lifetime test stays positive despite the term restarting at 30 years. Both tests matter — a deal can break even quickly yet save little over its life if the term stretches far beyond the old payoff date. Here the two-point rate drop is large enough to win on both measures, which is the exception worth recognizing rather than the typical small-drop offer.
Understanding your results
Break-even is a stay-length test, nothing more: it tells you the minimum time the new loan must survive for the deal to stop losing money. Compare it with your realistic horizon — not the horizon you hope for, but the one that accounts for possible moves, job changes or another refinance. A nine-month break-even forgives a lot of uncertainty; a forty-month break-even demands confidence most households should examine hard.
Read monthly savings and lifetime savings as separate verdicts. Monthly savings describe cash flow relief, which may be the true goal if the budget is tight. Lifetime savings describe wealth effect, and they shrink whenever the new term extends well past the old payoff date. When the two disagree — big monthly relief, thin lifetime gain — the refinance is mostly a term stretch wearing a rate cut’s clothing, and pricing a shorter new term in the same tool shows the alternative.
Assumptions and limitations
The comparison covers principal and interest only, because taxes, insurance and HOA dues continue under either loan and would cancel out of the difference. Closing costs enter as one figure you supply; a real Loan Estimate itemizes lender fees, title charges, prepaid items and any discount points, and those details decide close calls. The model assumes you hold each loan for its full remaining term at a fixed rate, so it cannot value a sale, a future refinance, or cash taken out. It also ignores any tax treatment of points or interest. Use the break-even month as a screening test, then verify the winning offer line by line against the lender’s official estimate before paying application fees.
Common mistakes to avoid
- Counting savings from month one. The first $5,200 of savings in the example is not profit — it is repayment of the closing costs. Only savings after month 9 are genuine gains.
- Using a no-cost refinance without checking the rate. Lender-paid costs are usually recovered through a higher rate. A supposedly free refinance can break even instantly yet save far less over its life; compare both offers in the tool.
- Rolling costs in and forgetting them. Financed closing costs raise the balance and accrue interest for the full term. Toggle the roll-in option both ways to see what the convenience actually costs.
- Refinancing repeatedly on small drops. Each refinance restarts the toll. Two refinances with 20-month break-evens in three years can leave you behind a single patient decision, because the second toll is paid before the first is recovered.
- Ignoring the calendar you actually have. A break-even of 30 months is a good deal for a household staying a decade and a bad one for a household likely to move in two years. The same numbers deserve opposite decisions.