Property Tax Calculator

Calculate real estate property taxes using assessed value, assessment ratios, millage rates, and homestead exemptions.

Estimate annual and monthly residential property taxes. Factors in fair market property value, local assessment ratios, millage rates (mills per $1,000 of taxable assessed value), and owner-occupied homestead exemptions to calculate monthly escrow impact.

How this calculator works

Assessed Value = Market Value * Assessment Ratio. Taxable Assessed Value = Assessed Value - Homestead Exemption. Annual Property Tax = (Taxable Assessed Value / 1000) * Millage Rate.

Key benefits

Assumptions & exclusions

Frequently asked questions

What is a property tax millage rate?

A millage rate is the tax rate used to calculate local property taxes. One mill equals one dollar of tax per $1,000 of assessed property value (a 25 mill rate equals 2.5% of assessed value).

What is a homestead exemption?

A homestead exemption reduces the taxable assessed value of your primary residence, lowering your property tax burden while protecting the home from certain creditors.

Why did my property tax bill change when I did nothing to the home?

Your bill is value times rate, and either side can move without you acting. A reassessment can raise your assessed value as market prices rise, and any of the overlapping districts — county, city, schools — can raise its millage. Either change flows straight through the same formula into a higher annual tax and a higher monthly escrow.

How is property tax collected when I have a mortgage?

Most lenders collect one twelfth of the estimated annual tax with each monthly mortgage payment and hold it in an escrow account, then pay the tax bill when it comes due. On an annual tax of $7,400 that is about $616.67 a month. If the actual bill comes in higher than estimated, the escrow payment is adjusted upward to cover the shortfall.

Can I challenge the assessed value on my home?

In most jurisdictions, yes. Assessment notices typically come with an appeal window during which you can present evidence — comparable sales, errors in the property record, condition issues — to the assessor or a review board. Because tax is charged on the assessed value, a successful reduction lowers the bill through the same millage formula, and it can repeat every year the lower value stands.

Does a homestead exemption save me the full exemption amount in tax?

No. The exemption reduces your taxable assessed value, not the tax itself. A $25,000 exemption at a millage rate of 18.5 mills saves 25 × $18.50 = $462.50 of tax. The saving grows with the millage rate, which is why the same exemption is worth more in a high-rate district than in a low-rate one.

Formula-Based Calculator · By QalcTools Editorial Team. Formulas tested against independent reference values · Content reviewed November 2026 by the QalcTools Editorial Team.

Methodology note: Municipal property tax assessment and ad valorem taxation principles.

Related calculators

Category: Taxes & Income Calculators

About this calculator

Property tax is the carrying cost of owning a home that never goes away, even after the mortgage is gone — and it is quoted in a unit, the mill, that hides its size from most buyers. This calculator translates the system into plain dollars: start with market value, apply your area’s assessment ratio, subtract a homestead exemption if you have one, and charge the millage rate against what remains. The result is your annual tax and the monthly escrow amount a lender will collect, so you can judge a home by its full monthly cost rather than its loan payment alone.

How it works

Enter the home’s fair market value, the millage rate and any homestead exemption; the engine also accepts an assessment ratio for jurisdictions that assess below market value. First the market value is multiplied by the assessment ratio to get the assessed value. Next the homestead exemption is subtracted, with the result floored at zero, to get the taxable assessed value. Finally the millage rate is applied: each mill is one dollar of tax per $1,000 of taxable assessed value, so the annual tax is the taxable value divided by 1,000, times the mills. Dividing by twelve gives the monthly escrow figure.

The formula, explained

Assessed value = Market value × Assessment ratio; Taxable value = Assessed value − Homestead exemption; Annual tax = (Taxable value ÷ 1,000) × Millage rate

The engine floors the market value and exemption at zero, defaults the assessment ratio to 100 percent when none is supplied, and multiplies value by the ratio expressed as a decimal. It subtracts the exemption from the assessed value and floors the taxable value at zero, so an exemption larger than the assessment produces no tax rather than a negative one. The annual tax is then taxable value divided by 1,000, multiplied by the millage rate; the monthly figure is that annual tax divided by 12, and the effective rate reported is the annual tax divided by the full market value. All outputs are rounded to cents.

Inputs and variables

VariableMeaningExample
Home Fair Market ValueWhat the home is worth on the open market. Your tax bill starts here even though some jurisdictions assess at only a fraction of this figure.$425,000
Assessment RatioThe percentage of market value that becomes assessed value in your jurisdiction. At 100 percent the two are equal; at 80 percent only four fifths of the value enters the tax formula.100%
Millage Rate (Mills)The total rate from all taxing districts combined — county, city, school and special districts added together. Multiply mills by $1 per $1,000 of taxable value to get tax.18.5 mills
Homestead ExemptionA reduction in taxable assessed value for your primary residence, where your state offers one. It is subtracted before the millage rate is applied, so its saving equals the exemption times the rate.$25,000

Worked example

A buyer considers a $425,000 home in an area that assesses at 100 percent of market value, with a combined millage rate of 18.5 mills and a $25,000 homestead exemption for a primary residence.

  1. Assessed value: $425,000 × 100% = $425,000.
  2. Taxable assessed value: $425,000 − $25,000 exemption = $400,000.
  3. Annual tax: ($400,000 ÷ 1,000) × 18.5 mills = 400 × $18.50 = $7,400.
  4. Monthly escrow: $7,400 ÷ 12 ≈ $616.67 collected with each mortgage payment.
  5. Effective rate check: $7,400 ÷ $425,000 = 1.74% of market value per year. The exemption saved $25 × 18.5 = $462.50 of tax.

Annual property tax of $7,400 on a taxable assessed value of $400,000 — about $616.67 per month in escrow, an effective rate of 1.74% of the $425,000 market value.

At $616.67 a month, the tax on this home rivals a car payment and adds roughly a third on top of a typical principal-and-interest charge for the same property — yet buyers routinely compare homes by loan payment alone. The millage framing hides that scale; the effective rate of 1.74 percent exposes it. Note also what moves the bill: a reassessment that lifts market value, or a millage increase by any one of the overlapping districts, raises the tax even though nothing about the home changed, which is why the monthly escrow figure deserves a stress test at a higher value before you buy.

Understanding your results

The monthly escrow figure is the number to carry into your housing budget, because that is how the tax will actually leave your account when a lender collects it. The annual figure is the one to watch over time: assessments are typically revisited on a cycle, and a rising market value flows straight into the bill through the same formula. If your area reassesses after a purchase at the new sale price, the tax in your first full year can be materially higher than the seller’s last bill suggested.

The effective rate — annual tax divided by market value — is the fairest way to compare properties across jurisdictions, because millage rates and assessment ratios are not comparable on their own. A home at 18.5 mills with a 100 percent ratio costs more than a home at 25 mills assessed at 60 percent of value. Convert both to an effective percentage of price, as this page does, before deciding which location is truly cheaper to own.

Assumptions and limitations

The engine applies one combined millage rate to one taxable value. Real bills are assembled district by district, sometimes with different exemptions applying to different districts, flat parcel charges that do not scale with value, and caps on how fast assessed value may rise each year — none of which a single-rate calculation can reproduce. It also cannot know your parcel’s actual assessment, whether you qualify for exemptions tied to age, disability or veteran status, or how a pending reassessment will change the value. Use the result to understand the mechanics and compare scenarios; use your county assessor’s figure for the amount you will actually be billed.

Common mistakes to avoid

Sources

Related guides