Overtime Calculator

Calculate overtime pay at 1.5x time-and-a-half and 2.0x double-time under federal FLSA regulations.

Calculate total gross earnings for workweeks exceeding 40 hours under the federal Fair Labor Standards Act (FLSA). Automatically computes standard time-and-a-half (1.5x regular hourly rate) and optional double-time (2.0x) for holiday or premium shifts.

How this calculator works

Regular Pay = Regular Hours (up to 40) * Hourly Rate. Overtime Pay = Overtime Hours (>40) * (Hourly Rate * 1.5). Double Time = Double Hours * (Hourly Rate * 2.0). Total Pay = Regular Pay + Overtime Pay + Double Time.

Key benefits

Assumptions & exclusions

Frequently asked questions

When does federal law require overtime pay?

Under the Fair Labor Standards Act (FLSA), covered non-exempt employees must receive overtime pay for all hours worked in excess of 40 during a workweek at a rate not less than one and one-half times their regular rate of pay.

Does federal law mandate double-time for working on weekends or holidays?

No. Federal law does not require double-time pay for weekends or holidays unless those hours push total hours worked past 40 for the week, or unless agreed upon in an employment contract or collective bargaining union agreement.

How is overtime pay calculated?

Hours beyond 40 in a workweek are paid at one and a half times your regular rate. At a $30 hourly rate, the overtime rate is $45, so 10 overtime hours pay $450 on top of $1,200 of regular pay for the first 40 hours.

What is my effective hourly rate in a week with overtime?

It is your total gross pay for the week divided by all hours worked. In the worked example, $1,770 for 52 hours gives an effective rate of $34.04 an hour — higher than the $30 base rate, but well below the $45 overtime rate, because most hours are still paid at the base rate.

Is overtime calculated per week or per pay period?

Per workweek under federal rules. A 50-hour week followed by a 30-hour week earns 10 overtime hours even though the two weeks average exactly 40 hours, and an employer may not average the weeks away. Enter your hours one workweek at a time in this calculator.

Does this calculator withhold tax from overtime pay?

No. The result is gross pay for the week before any withholding. Federal, state and payroll taxes will reduce the deposit, and the paycheck calculator on this site can estimate the net amount for a period that includes overtime earnings.

Formula-Based Calculator · By QalcTools Editorial Team. Formulas tested against independent reference values · Content reviewed November 2026 by the QalcTools Editorial Team.

Methodology note: US Department of Labor Fair Labor Standards Act (29 U.S.C. 207) regulations.

Related calculators

Category: Taxes & Income Calculators

About this calculator

Overtime is where an hourly wage stops being a single number. Under the federal Fair Labor Standards Act, hours beyond 40 in a workweek are paid at one and a half times the regular rate, and some employers add double-time for holidays or premium shifts. This calculator splits a workweek into its three kinds of hours — regular, time-and-a-half and double-time — and shows the pay for each band, the total gross for the week, and the blended effective hourly rate you actually earned across all hours. It is built for hourly workers checking a paycheck, and for anyone weighing whether extra shifts are worth what they appear to pay.

How it works

Enter your regular hourly rate and how the week’s hours divide among regular time, overtime at 1.5 times the rate, and double-time at 2 times the rate. The tool multiplies each block of hours by its own rate — the overtime rate is exactly one and a half times your base rate, and the double-time rate is exactly twice it — then adds the three pay blocks into total gross pay for the week. It also divides that total by all hours worked to produce your effective hourly rate, the single blended number that lets you compare a heavy-overtime week with a straight-time week, or with a salaried offer, on equal terms.

The formula, explained

Regular pay = Regular hours × Rate; Overtime pay = OT hours × 1.5 × Rate; Double-time pay = DT hours × 2 × Rate; Total = Regular + Overtime + Double-time; Effective rate = Total ÷ All hours

The engine floors the rate and each hour block at zero, derives the overtime rate as the base rate times 1.5 and the double-time rate as the base rate times 2.0, and multiplies each hour block by its rate with no rounding until the end. It deliberately does not decide which hours count as overtime: you supply the split, so the 40-hour threshold is applied by how you enter regular versus overtime hours, not detected from a total. Total hours are the sum of the three blocks, the effective rate is total pay divided by total hours (or the base rate itself if no hours are entered), and every reported figure is rounded to cents. The result is gross pay — no tax withholding is applied inside this engine.

Inputs and variables

VariableMeaningExample
Regular Hourly RateYour base pay per hour before premiums. Both premium rates are multiples of this figure, so a $2 error here becomes a $3 error on every overtime hour.$30.00 per hour
Regular Hours WorkedHours paid at the base rate in the week — normally the first 40. Hours entered here are never reclassified by the tool, even if the total week exceeds 40.40 hours
Overtime Hours (1.5x)Hours paid at time-and-a-half — under federal rules, covered hours beyond 40 in a single workweek. Count them workweek by workweek, not averaged over a pay period.10 hours
Double-Time Hours (2.0x)Hours paid at twice the base rate, where an employer policy, contract or state rule provides them — common for holidays or a seventh consecutive day in some states. Leave at zero if none apply.2 hours

Worked example

A warehouse worker earning $30 an hour works a 52-hour week: 40 regular hours, 10 hours at time-and-a-half, and 2 holiday hours paid at double-time by company policy.

  1. Premium rates: overtime rate $30 × 1.5 = $45 per hour; double-time rate $30 × 2 = $60 per hour.
  2. Regular pay: 40 × $30 = $1,200.
  3. Overtime pay: 10 × $45 = $450. Double-time pay: 2 × $60 = $120.
  4. Total gross for the week: $1,200 + $450 + $120 = $1,770 for 52 hours worked.
  5. Effective hourly rate: $1,770 ÷ 52 = $34.04 per hour — the premium hours lifted the blended rate $4.04 above the base rate.

Total gross pay of $1,770 for the 52-hour week — $1,200 regular, $450 overtime and $120 double-time — a blended effective rate of $34.04 per hour against a $30 base rate.

Compare the week with its straight-time shadow: 52 hours at a flat $30 would pay $1,560, so the premium structure added $210 — real money, but the week’s extra 12 hours were paid at an average well below the headline “time-and-a-half for everything”. The effective rate is the honest summary: if a salaried offer works out above $34.04 an hour at your expected hours, it beats this schedule on pay per hour even before benefits enter the comparison.

Understanding your results

The effective hourly rate is the figure to carry into decisions. A week of heavy overtime looks lucrative in total dollars, but dividing by the hours shows what your time actually sold for — and the blended rate rises only modestly because most hours are still paid at the base rate. Track it across a few weeks and you have a realistic personal rate to compare against a raise, a second job or a salaried offer, instead of comparing a best-case overtime week against a standard salary week.

Notice what the premium is really paying for: only the extra half (or extra full rate) on premium hours is the “bonus” for inconvenient time — in the example, $150 of the overtime block and $60 of the double-time block. The rest is your base rate for hours you would be paid anyway. That framing helps when an employer offers straight-time extra shifts instead: the difference between the two offers is exactly that premium sliver, not the whole overtime block.

Assumptions and limitations

This tool prices the hours split you give it; it does not determine your legal entitlement. Whether you are covered by federal overtime rules, how your employer defines the workweek, and whether daily overtime, seventh-day rules or state provisions give you more than the federal weekly standard all sit outside the model — several states impose daily overtime that a weekly split cannot capture. The calculation is gross pay for one week, with no income or payroll tax withheld, no shift differentials folded into the regular rate, and no blended-rate calculation for workers paid at two different base rates, which real rules may require.

Common mistakes to avoid

Sources

Related guides