Loan vs Line of Credit Calculator
Compare a fixed-term commercial installment loan against a flexible revolving business line of credit (LOC).
Side-by-side financing analysis for business owners. Compare borrowing costs between fixed-term commercial installment loans (where interest accrues on the full principal from day one) and revolving lines of credit (where interest is only charged on funds actively drawn).
How this calculator works
Term Loan Interest = Total Amortization Sum over N Months. LOC Annual Cost = (Credit Limit * Average Utilization Rate) * Annual LOC Interest Rate.
Key benefits
- Compares fixed monthly principal & interest vs flexible interest-only revolving draws
- Factors in utilization rate assumptions to model real-world business cash needs
- Provides clear recommendation based on capital purpose (working capital vs long-term assets)
Assumptions & exclusions
- Line-of-credit cost assumes the average utilization you enter stays constant.
- Variable rates can change over the comparison period; the model uses the rates entered.
- Fees are included only as entered; draw and repayment flexibility is valued only through cost.
Frequently asked questions
When should a business use a line of credit instead of a term loan?
A Line of Credit is ideal for short-term working capital, seasonal inventory, and smoothing payroll while waiting for accounts receivable. A Term Loan is best for large, permanent capital investments like equipment or real estate.
Why can a line of credit be cheaper despite a higher interest rate?
Because the rate applies only to the balance actually drawn. A line at 11% on an average $30,000 drawn balance costs $3,300 a year, while a loan at 8% charges on the full amount from day one. Low average utilization is what makes the higher rate win.
What does average utilization mean and how do I estimate mine?
It is the share of your credit limit you expect to have drawn in a typical month. Estimate it from your past year: add the drawn balance you would have carried each month, including zero months, and divide by twelve, then express that average as a percentage of the limit.
Does a line of credit require monthly principal payments?
Typically no — most business lines require interest payments, and sometimes a small percentage of the balance, while the principal remains outstanding until you pay it down voluntarily or the facility is reviewed. That flexibility is convenient, but it also means the balance can persist for years.
Can a lender reduce or cancel my line of credit?
Yes. Business lines are usually reviewable, and lenders can lower limits, raise margins or decline renewal, especially during downturns or if your financials weaken. That is a structural risk a fixed term loan does not carry once funded, and it belongs in the comparison alongside interest cost.
Which option is better for buying equipment?
Usually a term loan, because the need is permanent and the payments retire the debt over the equipment's useful life. Funding equipment on a revolving line leaves a long-lived asset on short-term, variable-rate, reviewable credit — a mismatch that strains cash flow when the line is repriced or reduced.
Formula-Based Calculator · By QalcTools Editorial Team. Formulas tested against independent reference values · Content reviewed November 2026 by the QalcTools Editorial Team.
Methodology note: Commercial lending risk structures and Federal Reserve Small Business Credit Survey benchmarks.
Related calculators
Category: Business & Commercial Calculators
About this calculator
A term loan and a line of credit can offer the same dollar amount and produce completely different costs, because one charges interest on the full amount from day one while the other charges only on what you actually draw. This calculator puts the two side by side: a fixed term loan with a set monthly payment and total interest over its term, against a revolving line where you enter your average utilization and see the monthly and annual interest that usage creates. It is built for the working-capital decision — seasonal stock, bridging receivables, smoothing payroll — where how much you use, and for how long, decides which structure wins.
How it works
Enter the facility amount, the term loan rate, the line rate and the share of the line you expect to keep drawn on average. For the loan, the tool amortizes the full amount over the term in months at the loan rate, producing the fixed monthly payment and the lifetime interest. For the line, it multiplies the facility by your utilization to get the average drawn balance, then charges the line rate on that balance only, reporting the monthly interest and its annual total. A short verdict follows a simple rule: below 60 percent average utilization the line is flagged as the cheaper structure on interest cost; at or above it, the loan’s predictability is favored.
The formula, explained
Term payment = A × r ÷ (1 − (1 + r)^−n); Drawn balance = A × Utilization%; LOC monthly interest = Drawn balance × LOC rate ÷ 12
- A — Facility amount: the loan principal or the line limit, entered as one shared figure ($)
- r — Monthly term-loan rate: annual loan rate % ÷ 100 ÷ 12 (decimal/month)
- n — Term loan length in months over which the full amount amortizes (months)
- Utilization% — Average share of the line kept drawn; the engine clamps it between 0 and 100 (%)
The engine floors the facility at $1,000 and converts the term rate to a monthly decimal, applying the standard annuity formula — or amount divided by months when the rate is zero — and totals the loan interest as payments times months minus principal. For the line it clamps utilization between 0 and 100 percent, multiplies the facility by that share, and charges the line’s annual rate on the drawn balance, dividing by 12 for the monthly figure; the line balance itself is never amortized, so no principal repayment is modeled on that side. Payments and monthly interest are rounded to cents, totals to whole dollars, and the written verdict switches at exactly 60 percent utilization.
Inputs and variables
| Variable | Meaning | Example |
|---|---|---|
| Facility Amount | The amount on offer in both structures — the loan principal and the line limit are compared at the same size so the cost difference reflects structure, not scale. | $75,000 |
| Term Loan Rate (% APR) | The fixed annual rate quoted for the installment loan. Its interest is charged on the full amount for the whole term, declining only as the balance amortizes. | 8% |
| Line of Credit Rate (% APR) | The annual rate on the revolving line, usually variable and often higher than the loan rate — but applied only to the drawn balance. | 11% |
| Term Length (Months) | How long the term loan runs. A longer term lowers the monthly payment while raising the total interest the loan side of the comparison reports. | 48 months |
| Average LOC Utilization (%) | The share of the line you realistically keep drawn in a typical month. This single estimate decides the comparison, so base it on your actual borrowing pattern, not the limit. | 40% drawn |
Worked example
A business compares a $75,000 facility: a term loan at 8 percent over 48 months, versus a line at 11 percent that it expects to keep about 40 percent drawn on average.
- Facility amount: $75,000
- Term loan rate: 8%
- Term length: 48 months
- Line of credit rate: 11%
- Average utilization: 40%
- Term loan payment: amortizing $75,000 over 48 months at 8% gives $1,830.97 per month.
- Term loan total interest: $1,830.97 × 48 − $75,000 ≈ $12,887 over the full term.
- Average drawn balance on the line: $75,000 × 40% = $30,000.
- Line interest: $30,000 × 11% = $3,300 per year, or $275.00 per month — interest only, with the $30,000 balance still outstanding.
A term loan payment of $1,830.97 per month with $12,887 of total interest, versus line interest of $275.00 per month and $3,300 per year at 40 percent utilization.
At 40 percent utilization the line wins the interest comparison easily despite its higher rate, because it charges on $30,000 rather than $75,000 — that is the structural advantage of revolving credit for genuinely intermittent needs. But the two monthly figures are not the same kind of payment: the loan’s $1,830.97 is retiring the debt and ends in 48 months, while the line’s $275 buys no principal reduction at all and the balance remains whenever the lender reviews the facility. If utilization crept toward 100 percent and stayed there, the line would cost $8,250 a year with nothing paid down — the pattern the 60 percent verdict threshold is warning about.
Understanding your results
Utilization is the whole ballgame, so estimate it from your history, not your intentions. Pull last year’s statements and average what you would actually have drawn month by month, including the months at zero. Many owners discover their ‘occasional’ line would have sat at 80 percent drawn all year — at which point a term loan’s discipline, fixed rate and forced amortization usually serve them better and cheaper than an interest-only habit.
Also compare what each payment buys. The term payment is part interest, part forced saving in the form of a shrinking balance; at the end you own the asset free and clear. The line payment is pure rent on money. For a need that truly comes and goes — inventory that sells within a season — renting is efficient. For a need that never goes away, the line’s lower monthly figure is the most expensive way to feel comfortable.
Assumptions and limitations
This comparison prices interest only, under constant assumptions. It holds your utilization at one average level, keeps both rates fixed for the whole horizon — although line rates are typically variable and can rise — and models no principal repayment, fees, annual charges or draw costs on the line side. It also assumes the full facility is available in both structures on the terms entered, and it cannot value flexibility itself: the ability to redraw repaid funds, or the risk that a lender reduces or freezes a line during a downturn. Read the verdict as a cost signal tied to the 60 percent rule the engine applies, then weigh the cash-flow and risk differences it does not price.
Common mistakes to avoid
- Comparing the two monthly payments directly. The loan payment includes principal and ends; the line figure is interest only and ends never. Compare total interest and what remains owed, not just the monthly outlay.
- Guessing utilization optimistically. The line looks cheapest at low utilization, so wishful estimates flatter it. Average your real drawn balances across a full year, slow months included.
- Funding a permanent need with a revolving line. Equipment and other long-lived needs belong on term debt matched to their life. A line kept permanently drawn is expensive, reviewable and repayable on demand.
- Ignoring that line rates move. The model holds the line rate constant, but most business lines float with a benchmark. A two-point rise on a heavily drawn line can erase its cost advantage in a year.
- Forgetting fees and renewal risk. Annual fees, draw fees and the possibility of a reduced limit at renewal never enter this comparison. Ask about all three before the cheaper-looking option wins by default.