Interest-Only Mortgage Calculator

Calculate temporary low payments during the interest-only draw period and prepare for payment shock when principal repayment begins.

Understand the mechanics and risks of interest-only loans. Calculate your monthly payment during the initial interest-only period (e.g. 5 or 10 years), and see how your payment jumps when the remaining principal amortizes over the shortened term.

How this calculator works

During IO period: Monthly Payment = Loan Amount * (Annual Rate / 12). During repayment period: Amortized payment over remaining (Term - IO Years) * 12 months.

Key benefits

Assumptions & exclusions

Frequently asked questions

What is mortgage payment shock?

Payment shock occurs when an interest-only loan resets. Because principal was untouched, you now have only 20 years to pay off a 30-year balance, causing payments to jump by 40% to 60%.

Who typically uses an interest-only mortgage?

Borrowers with strong but irregular income — commissions, bonuses, business distributions — sometimes use the low required payment for flexibility while paying principal voluntarily in lump sums. The structure assumes financial discipline and a credible plan for the balance when amortization begins.

Do I build any equity during the interest-only period?

Not from the loan itself: the balance is identical at the end of the period. Your equity changes only if the home's value moves or you make voluntary principal payments. Appreciation is possible but never guaranteed, so the down payment remains your certain equity.

Can I pay principal voluntarily during the interest-only years?

Usually yes, subject to your loan documents. Voluntary principal lowers the balance being charged interest, which reduces later interest-only payments on many structures and shrinks the balance the amortizing payment must retire. Confirm how your servicer credits extra funds before relying on this.

How is an interest-only mortgage different from a HELOC?

An interest-only mortgage is a closed loan for a fixed amount that converts to amortizing payments after its opening period. A HELOC is a revolving line you can draw, repay and redraw during its draw period, usually at a variable rate, before its own repayment phase.

What happens if I cannot afford the payment when amortization begins?

The higher payment is contractual, so options are limited to refinancing, selling, or having prepaid enough principal to lower the balance beforehand. None is guaranteed to be available on good terms, which is why the reset payment should be affordable in your plan from the start.

Formula-Based Calculator · By QalcTools Editorial Team. Formulas tested against independent reference values · Content reviewed November 2026 by the QalcTools Editorial Team.

Methodology note: CFPB guidelines on alternative and non-QM mortgage structures.

Related calculators

Category: Mortgage & Housing Calculators

About this calculator

An interest-only mortgage splits repayment into two very different lives. For an opening period — often five or ten years — the required payment covers only the interest on the full balance, so the bill is strikingly low and the balance does not move at all. Then the entire principal must be repaid over the years that remain, and the payment jumps to whatever that compressed schedule demands. This calculator prices both lives on the loan you enter: the interest-only charge on today’s balance, and the fully amortizing payment that follows when the remaining term takes over. It is built for borrowers who are being shown the low first payment and need to see the second one.

How it works

Enter the home price, down payment and rate. The interest-only payment is the simplest figure in mortgage math: the loan amount times the monthly rate, because with no principal due, the whole payment is the month’s interest charge on a balance that never falls. The tool’s amortization engine then prices the second life — set the term to the years that remain after the interest-only period and it computes the principal-and-interest payment that retires the same, untouched balance over that shorter window, plus the interest that phase accrues. Comparing the two payments, and adding the interest paid during the interest-only years, gives the full cost of deferring principal.

The formula, explained

Interest-only payment = P × i; Repayment payment = P × i(1 + i)^m ÷ ((1 + i)^m − 1), where m = months remaining after the interest-only period

The interest-only charge needs no simulation: it is the opening balance times the monthly rate, the same interest figure the amortization engine charges in month one, repeated unchanged because the balance never falls. The repayment phase is priced by the standard engine — rate capped at 100 percent, term capped at 1,200 months — running the annuity formula over the remaining months (balance divided by months when the rate is 0), then walking the balance month by month to total that phase’s interest. Interest paid during the interest-only years is the monthly charge times those months, and the two interest figures add for the lifetime total. The worked example below runs the engine over the 20-year repayment term that follows a 10-year interest-only period on a 30-year loan.

Inputs and variables

VariableMeaningExample
Home Purchase PriceThe price of the property. With the down payment it sets the balance that sits untouched — and fully owed — through the interest-only years.$500,000
Down PaymentCash paid at purchase. It is the only equity you hold at the start; the loan itself builds none until amortization begins.$100,000 (20%)
Interest Rate (APR %)The rate charged on the full balance. During the interest-only period it alone determines the payment, so small rate differences move the bill directly.6.0%
Interest-Only Period (Years)The opening stretch — commonly 5 or 10 years — when only interest is due. Every year in this phase is a year the remaining repayment schedule does not get.10 years
Remaining Repayment TermThe years left after the interest-only period, over which the entire principal must now be repaid. On a 30-year loan with 10 interest-only years, this is 20 years.20 years
Property Tax Rate and InsuranceOwnership costs that continue in both phases and are added to whichever loan payment applies, so the true monthly jump is between two totals, not two loan payments alone.1.2% per year / $1,800 per year

Worked example

A borrower takes a $400,000 loan on a $500,000 home with 20 percent down at 6.0 percent: interest only for 10 years, then the full balance amortized over the remaining 20 years of a 30-year loan.

  1. Interest-only payment: $400,000 × (6.0% ÷ 12) = $2,000 per month. With tax of $500 and insurance of $150, the total monthly outlay in this phase is $2,650.
  2. Interest paid across the 10 interest-only years: $2,000 × 120 = $240,000 — and the balance at the end is still exactly $400,000.
  3. Repayment phase: the engine amortizes the untouched $400,000 over the remaining 240 months at 6.0%, giving principal and interest of $2,866 per month — a jump of $866, about 43 percent, on the loan payment.
  4. With the same tax and insurance, the total monthly outlay rises from $2,650 to $3,516 when amortization begins.
  5. Interest in the repayment phase: $287,774. Combined lifetime interest: $240,000 + $287,774 = $527,774 on a $400,000 loan.

Interest-only payments of $2,000 a month for 10 years costing $240,000 with the balance unmoved, then $2,866 a month for 20 years; lifetime interest of $527,774.

The structure’s appeal and danger are the same number: for a decade the borrower pays $866 a month less than the amortizing payment, and in exchange hands back $240,000 that retires nothing and faces a 43 percent payment increase on a fixed date. The strategy can suit a borrower with genuinely rising or lumpy income who will sell, refinance or receive funds before the reset — but the exit must be real, because the second payment is not optional and the balance waiting for it is the full original loan.

Understanding your results

Compare the phases on total interest, not on the opening payment. An ordinary 30-year amortizing loan at this rate would spread principal from month one; the interest-only structure concentrates a decade of pure interest first, which is why its lifetime interest runs so much higher even though the rate is identical. The low opening payment is not a discount — it is principal repayment postponed, and postponement at 6 percent on $400,000 costs $2,000 every single month it lasts.

The payment jump is the second thing to internalize. It arrives on a schedule written at closing, indifferent to your income that year, and it reflects simple arithmetic: the same balance, twenty years instead of thirty to repay it. Voluntary principal payments during the interest-only years are the one lever that softens the landing, because every dollar prepaid lowers both the balance being charged and the balance the repayment payment must retire. If a plan depends on prepaying, test it by re-running the tool on the reduced balance.

Assumptions and limitations

This page prices the two phases at the single rate you enter. Many real interest-only loans are also adjustable-rate, so the rate — and both payments — can move before and after the repayment phase begins, which this model does not simulate. It assumes no voluntary principal is paid during the interest-only years and that the full balance enters repayment; any prepayment changes the second payment. Qualification for these loans typically involves stricter underwriting and larger reserve expectations than the page can show, and taxes and insurance are level estimates that will change over a decade. Confirm the interest-only period, the recast terms and any rate adjustment rules in your loan documents.

Common mistakes to avoid

Sources