Business Depreciation Calculator

Build a year-by-year depreciation schedule for a business asset using straight-line, declining balance, sum-of-years-digits or units-of-production.

Depreciation method choice changes taxable income every year an asset is in service. Enter the asset cost, salvage value and useful life, then compare four standard methods — straight-line, declining balance, sum-of-years-digits and units-of-production — with a full schedule of each year’s expense, accumulated depreciation and ending book value.

How this calculator works

Straight-Line: (Cost − Salvage) / Life each year. Declining Balance: Book Value × Rate (default 200% / Life), never below salvage. Sum-of-Years-Digits: (Cost − Salvage) × Remaining Life / (Life × (Life + 1) / 2). Units-of-Production: (Cost − Salvage) / Total Units × Units Used per Year.

Key benefits

Assumptions & exclusions

Frequently asked questions

Is this the same as MACRS tax depreciation?

Not exactly. MACRS is the IRS system with prescribed recovery periods and conventions (half-year, mid-quarter) and published percentage tables. This calculator implements the underlying book methods — straight-line and declining balance among them — which MACRS is built from. Use IRS Publication 946 tables for an actual tax filing.

Which depreciation method should a business use?

For book reporting, the method should match how the asset is consumed: straight-line for even use, accelerated methods when value and productivity fall fastest early, units-of-production when wear tracks output. Tax elections such as Section 179 and bonus depreciation are separate decisions to review with a tax professional.

What is salvage value?

The estimated amount the asset will be worth at the end of its useful life. Only the cost above salvage value is depreciated. Under MACRS, salvage value is treated as zero for most property — one of the differences between book schedules like this one and a tax return.

Does depreciation affect cash flow?

Depreciation itself is non-cash: no money leaves the business when it is recorded. It affects cash flow indirectly by reducing taxable income and therefore tax payments. That is why EBITDA adds it back, and why this schedule is a planning tool rather than a cash forecast.

How is this different from the vehicle depreciation calculator?

The vehicle tool estimates a car’s market value loss over time. This tool builds accounting depreciation schedules for any business asset — machinery, computers, furniture, equipment — using formal depreciation methods and book values.

Can I switch depreciation methods partway through an asset's life?

For book reporting, a change in method or useful-life estimate is generally applied going forward to the remaining book value rather than by rewriting past years, and it should be documented and justified by how the asset is actually used. Tax depreciation follows its own change procedures, so the method choice at purchase deserves care.

Formula-Based Calculator · By QalcTools Editorial Team. Formulas tested against independent reference values · Content reviewed November 2026 by the QalcTools Editorial Team.

Methodology note: Standard cost-accounting depreciation methods (straight-line, declining balance, SYD, units-of-production) as defined in financial accounting literature and IRS Publication 946 concepts.

Related calculators

Category: Business & Commercial Calculators

About this calculator

Depreciation decides how the cost of a business asset is spread across the years it serves — and with it, how much expense lands in each year’s results and tax conversation. The method you choose changes the timing, never the total: every method in this calculator writes the asset down from its cost to its salvage value, but straight-line spreads the charge evenly, accelerated methods front-load it, and units-of-production ties it to actual use. Enter the asset’s cost, salvage value and useful life, pick a method, and the tool builds the full year-by-year schedule of expense, accumulated depreciation and ending book value, so you can compare methods on the same asset before discussing elections with your tax professional.

How it works

The tool starts from the depreciable base — the asset’s cost minus its salvage value — because only that amount is ever written off. Straight-line divides the base evenly across the useful life. Declining balance instead applies a fixed percentage to the shrinking book value each year, using double the straight-line rate unless you enter your own percentage, and never lets the book value fall below salvage. Sum-of-years-digits weights the base by the years remaining, largest first. Units-of-production divides the base by the asset’s expected lifetime output to get a per-unit rate, then charges for the units used each year. Whichever method you choose, the schedule ends at the same place: book value equal to salvage value.

The formula, explained

Depreciable base = Cost − Salvage value; Straight-line = Base ÷ Life; Declining balance = Book value × Rate; Sum-of-years-digits = Base × Remaining life ÷ (Life × (Life + 1) ÷ 2); Units-of-production = Base ÷ Total units × Units used

The engine caps salvage value at the asset’s cost and floors the useful life at one year and at most one hundred, then computes the depreciable base once. For declining balance, the rate is your entered percentage when one is given, and otherwise twice the straight-line rate — two divided by the life. Each year’s declining-balance charge is the opening book value times that rate, limited so the book value never drops below salvage; the sum-of-years-digits denominator is life times life plus one, divided by two. For units-of-production the per-unit rate is the base divided by total units, and each year’s charge is that rate times the units you enter per year, limited to the base not yet depreciated. In every method a year’s charge is clamped to the remaining base, and the final year absorbs any rounding so the schedule lands exactly on salvage value. Schedule figures are rounded to cents.

Inputs and variables

VariableMeaningExample
Asset CostWhat the business paid for the asset. It is the starting book value and, with salvage value, determines everything that can ever be depreciated.$50,000
Salvage ValueThe estimated value remaining at the end of the asset’s useful life. Depreciation stops at this floor in every method, so only the cost above it is written off.$5,000
Useful LifeThe years over which the asset is expected to serve. It sets the length of the schedule and, for straight-line, the size of each year’s equal charge.7 years
Depreciation MethodThe pattern of the write-off: straight-line, declining balance, sum-of-years-digits, or units-of-production. The method changes timing only — the total written off is the same base.Straight-line
Declining Balance RateThe percentage applied to the shrinking book value when you use the declining-balance method. Leave it at zero in the tool and it applies the double rate, 200% divided by the life.0 (uses double rate)
Total Expected UnitsThe asset’s lifetime output for the units-of-production method — total miles, hours or items. It sets the per-unit rate together with the depreciable base.100,000 units
Units Used per YearThe output you expect in a typical year for the units-of-production method. Years of heavier use carry heavier depreciation under this method, by design.15,000 units per year

Worked example

A business buys equipment for $50,000 with an expected salvage value of $5,000 and a seven-year useful life, and runs the straight-line schedule. (The same inputs imply a per-unit rate of $0.45 if the asset were instead depreciated over 100,000 units of production.)

  1. Depreciable base: $50,000 − $5,000 = $45,000 — the total that will be written off across the schedule, under any method.
  2. Annual straight-line charge: $45,000 ÷ 7 = $6,428.57 per year, the same in every year of the schedule.
  3. Year one: accumulated depreciation reaches $6,428.57 and the ending book value falls to $50,000 − $6,428.57 = $43,571.43.
  4. By the end of year four, accumulated depreciation is $25,714.29 and the book value stands at $24,285.71 — just past the halfway point of the write-off.
  5. The final year absorbs the rounding, total depreciation lands exactly on $45,000, and the ending book value is exactly the $5,000 salvage value.

Straight-line depreciation of $6,428.57 a year for 7 years, totaling $45,000 and reducing the book value from $50,000 to exactly the $5,000 salvage value.

Straight-line is the benchmark against which the other methods should be judged: the same $45,000 total, delivered in equal slices. Switching this asset to declining balance would pull much larger charges into the first years and smaller ones later, which matters when early deductions are worth more than later ones, while units-of-production would let actual usage set the pace. None of those choices changes the total written off or the salvage floor — they only rearrange the calendar. That is the right way to use this page: pick the pattern that matches how the asset is genuinely consumed, then take the schedule into your tax conversation.

Understanding your results

Read the schedule’s three columns as a story: the yearly charge is the expense that lands in that year, accumulated depreciation is the total written off so far, and ending book value is what the asset still carries on the books. Comparing two methods on the same asset, the accumulated column is where the difference lives — accelerated methods pull ahead early and straight-line catches up by the final year, when both accumulated columns read the same $45,000.

Book value is an accounting figure, not a market price. A machine carried at $24,285.71 after four years may be worth more or less than that if sold, and the schedule makes no claim either way. Its proper uses are consistency in the accounts and planning the timing of deductions — the moment it is treated as a valuation, it misleads. The salvage floor makes the same point: the schedule deliberately stops at $5,000 because that residue was never part of the depreciable cost.

Assumptions and limitations

This schedule implements the underlying book depreciation methods in their clean textbook form: full years, no partial-year conventions, and charges computed from the inputs exactly as entered. The tax system businesses actually file under prescribes its own recovery periods, conventions and percentage tables, which can produce materially different yearly figures for the same asset, and expensing elections that write an asset off immediately are not modeled here at all. The units-of-production schedule applies the single yearly usage figure you enter uniformly, while real usage varies year to year. Treat the output as a planning and comparison schedule, and have the filing computation itself prepared under the rules that apply to your asset and placed-in-service date.

Common mistakes to avoid

Sources